GE TransPort PT878 Panametrics Portable Liquid Ultrasonic Flowmeter

How to program the PT878 for a clamp-on system

This video walks you through how to program the PT878 for a clamp-on ultrasonic flow metering system. It covers selecting measurement units, programming selections for transducer type and wedge temperature, pipe material, outer diameter (OD), and wall thickness, lining material, fluid type, and path traverses and spacing for clamp-on installations.

See the whole series of videos about how to use the GE Transport PT878 Panametrics Liquid Ultrasonic Flowmeter

  1. What's in the PT878 portable ultrasonic flow meter kit
  2. How to unpack and pack the PT878 flowmeter rental kit
  3. Calibrating and operating the thickness gauge
  4. How to connect a power supply to the PT878
  5. How to adjust the PT878 display contrast and backlight
  6. How to program the PT878 for a clamp-on system
  7. How to install ultrasonic transducers onto a pipe
  8. How to connect and disconnect transducer cables
  9. How to change PT878 display viewing and parameters
  10. How to view PT878 diagnostics on one page
  11. How to save and access site files on the PT878
  12. How to start a PT878 meter log
  13. How to connect a PT878 to your computer
  14. How to transfer a PT878 meter log to your computer