3M Sound Examiner SE-402 Type 2 Datalogging Integrating Sound Level Meter

As low as $60.00
3M Sound Examiner SE-400 series area sound level meters are designed for performing accurate noise level measurement in highly variable environments. They calculate the average sound pressure level over the run time, and datalog the maximum, minimum, and peak values. They are great for hearing conservation programs and environmental noise assessments. By downloading the data to your PC with 3M Detection Management Software, you can produce all the necessary reports to comply with workplace standards.
  • Choice of general service (white) meter with Type 2 microphone or intrinsically safe (red) meter with Type 1 microphone
  • 30 to 140 dBA overall range, 110 dBA total dynamic measurement range, 143 dBA max sampled peak level
  • Three selectable exchange rates: 3, 4, and 5 dBA
  • A, C, and Z peak frequency weighing
  • SPL, Lmax, Lmin, peak, Leq/Lavg, and elapsed time
  • Acoustic standards: IEC 61672-1 (2002), ANSI S1.43-1997 (R2007)
More Information
SKU SE-402
Manufacturer 3M
Kit Contents

Sound Examiner with microphone, windscreen, calibrator and adapter, USB cable, AC charger, 3M DMS software, user manual, calibration certificates, and carrying case.

Shipping Dimensions (LxWxD) 15x13x7
Weight (lbs) 10.0000
Measuring Range Decibels 30 - 140 dBA
Frequency Weight A, C, Z
Time Response Fast, Slow
Exchange Rate 3, 4, or 5 dBA
Measuring Parameters SPL, Max, Min, Peak, Leq, Lavg, Le, and elapsed time
Internal Memory 2MB (34 days at 1-minute logging)
Power Rechargeable Lithium Polymer Battery
Write Your Own Review
You're reviewing:3M Sound Examiner SE-402 Type 2 Datalogging Integrating Sound Level Meter
Your Rating