*** Please note this unit will have a calibration certificate, but calibration is conducted every 2 years due to low value of instrument and high cost of calibration. NIST calibration only valid for 1 year. If NIST calibration is required, please call to confirm.
Extech's MO297 pinless moisture sensor lets you measure moisture in wood and building materials reading up to 0.75" below the surface with virtually no surface damage. Its remote pin-type probe can be used for contact moisture readings in hard-to-reach or hazardous areas. The MO297 has a large dual display screen that simultaneously displays percentage of moisture in wood or material being tested and air temperature, infrared temperature, or humidity. The non-contact IR thermometer has an 8:1 distance-to-spot ratio and a 0.95 fixed emissivity.
Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
Built-in humidity/temperature probe measures relative humidity, air temperature plus grains per pound (GPP)/(g/kg), dewpoint, vapor pressure, and condensation point
Remote Pin-type probe (MO290-P) with a 3-foot cable allows for contact moisture readings
Manually store/recall up to 20 labeled readings
Programmable high/low moisture and humidity alarms
Infrared circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
Large dual display screen with LCD display
Battery life of 24-32 hour, using alkaline 9-volt battery