MultiRAE by RAE Systems - Multigas Monitor
RAE Systems' MultiRAE multigas monitors give you the ability to detect and monitor up to six gases for personal protection and industrial leak detection applications. This MultiRAE can test for VOCs in a range of 0-5000 ppm with a resolution of 0.1ppm. More sensors & specs below.
Rental Includes: MultiRAE Gas Monitor, Travel Charger with USB Connection, A/C Charger, Alkaline Battery Pack, Calibration Cap, Phillips Screwdriver & Dual Hex Wrench, PID Removal Tool, Spare Charcoal Filters (for CO Sensor), Mini USB Cable, Spare Pump Filter, Safety Suite Device Configurator on Flash Drive.
*** RAE Probe Kit for 10ft tubing extension available for rent ***
*** 7L Gas Canisters for in-field calibration available for purchase. ***
|
Available Electrochemical Sensors You can choose up to 6 sensors including the PID: |
|||||
|---|---|---|---|---|---|
| Standard | Optional (Additional charge for calibration) | ||||
| Sensor | Range | Resolution | Sensor | Range | Resolution |
| CO | 0–500 ppm | 1.0 ppm | Cl2 | 0–50 ppm | 0.1 ppm |
| CO, H2-Compensated | 0–2000 ppm | 10 ppm | H2 | 0–1,000 ppm | 10 ppm |
| CO / H2S Combo | 0–500 ppm CO; 0–100 ppm H2S | 1 ppm CO; 0.1 ppm H2S | HCHO | 0–10 ppm | 0.01 ppm |
| LEL | 0–100% volume | 1% | NH3 | 0–100 ppm | 1.0 ppm |
| O2 | 0–30% volume | 0.1% | NO | 0–250 ppm | 0.5 ppm |
| H2S | 0–100 ppm | 0.1 ppm | NO2 | 0–20 ppm | 0.1 ppm |
| VOC | 0–5000 ppm | 0.1 ppm | SO2 | 0–20 ppm | 0.1 ppm |
| EtOA | 0–100 ppm | 0.5 ppm | |||
- 0-5000 ppm range PID, 0.1 ppm resolution
- Display readout shows real-time gas concentrations, PID measurement gas and correction factor, Man Down Alarm on/off, STEL, TWA, peak and minimum values
- Visual, audible, and vibratory alarms plus Man Down Alarm
- Battery life up to 12 hours with rechargeable Li-ion pack; Alkaline included for additional 6 hours runtime
- Certified as Intrinsically Safe by DoC, ATEX, IECEx, IP-67, IP-65, and CSA
- Fully automated bump testing and calibration with RAE Systems AutoRAE 2
| SKU | MBB3-A1C112E-010 |
|---|---|
| Manufacturer | Honeywell RAE Systems |
| Kit Contents | MultiRAE Gas Monitor, Travel Charger with USB Connection, A/C Charger, Alkaline Battery Pack, Calibration Cap, Phillips Screwdriver & Dual Hex Wrench, PID Removal Tool, Spare Charcoal Filters (for CO Sensor), Mini USB Cable, Spare Pump Filter, Safety Suite Device Configurator on Flash Drive. |
| Gas Sensor Type | Photoionization Detector (PID) |
| Measuring Range VOCs | 0 - 5000 PPM |
| Measuring Range H2 | 0 - 1000 PPM |
| Measuring Range LEL | 0 - 100% LEL |
| Measuring Range Cl2 | 0 - 50 PPM |
| Measuring Range CO | 0 - 500 PPM |
| Measuring Range O2 | 0 - 30% |
| Measuring Range NO2 | 0 - 20 PPM |
| Measuring Range NH3 | 0 - 100 PPM |
| Measuring Range Benzene | 0 - 200 PPM |
| Internal Memory | 6 months for 5 sensors at 1-minute intervals, 24/7 |
| Power | Alkaline Batteries , Rechargeable Lithium Ion Battery |
| Shipping Dimensions (LxWxD) | 18x14x9 |
| Weight (lbs) | 11.000000 |
