Loading...

MultiRAE Lite PID by RAE Systems - Multigas Monitor

MAB3-A2C112E-011
As low as $105.00

RAE Systems' MultiRAE Lite multigas pumped monitors give you the ability to detect and monitor up to six gases for personal protection and industrial leak detection applications. MultiRAE Lite can test for VOCs in a range of 0-1000 ppm, combustibles, and a range of toxic threats, plus monitor sufficient oxygen levels.

Rental Includes: MultiRAE Lite Gas Monitor, Travel Charger with USB Connection, A/C Charger, Alkaline Battery Pack, Calibration Cap, Phillips Screwdriver & Dual Hex Wrench, PID Removal Tool, Spare Charcoal Filters (for CO Sensor), Mini USB Cable, Spare Pump Filter, Safety Suite Device Configurator on Flash Drive.

*** RAE Probe Kit for 10ft tubing extension available for rent ***

***  7L Gas Canisters for in-field calibration available for purchase.  ***

 

Available Electrochemical Sensors

You can choose up to 6 sensors including the PID/VOC Sensor:

Standard Optional ($45 charge for non-standard sensor replacement)
Sensor Range Resolution Sensor Range Resolution
CO 0–500 ppm 1.0 ppm CL2 0–50 ppm 0.1 ppm
CO, H2-Compensated 0–2000 ppm 10 ppm H2 0–1,000 ppm 10 ppm
CO / H2S Combo 0–500 ppm CO; 0–100 ppm H2S 1 ppm CO; 0.1 ppm H2S HCHO 0–10 ppm 0.01 ppm
LEL 0–100% volume 1% NH3 0–100 ppm 1.0 ppm
O2 0–30% volume 0.1% NO 0–250 ppm 0.5 ppm
H2S 0–100 ppm 0.1 ppm NO2 0–20 ppm 0.1 ppm
VOC 0–1000 ppm 1 ppm SO2 0–20 ppm 0.1 ppm
      EtOA 0–100 ppm 0.5 ppm
  • 0-1000 ppm range PID, 1 ppm resolution
  • Display readout shows real-time gas concentrations, PID measurement gas and correction factor, STEL, TWA, peak and minimum values
  • Visual, audible, and vibratory alarms plus Man Down Alarm
  • Battery life up to 12 hours with rechargeable Li-ion pack; Alkaline included for additional 6 hours runtime
  • Certified as Intrinsically Safe by DoC, ATEX, IECEx, IP-67, IP-65, and CSA
  • Fully automated bump testing and calibration with RAE Systems AutoRAE 2
More Information
SKU MAB3-A2C112E-011
Manufacturer Honeywell RAE Systems
Kit Contents

 MultiRAE Lite Gas Monitor, Travel Charger with USB Connection, A/C Charger, Alkaline Battery Pack, Calibration Cap, Phillips Screwdriver & Dual Hex Wrench, PID Removal Tool, Spare Charcoal Filters (for CO Sensor), Mini USB Cable, Spare Pump Filter, Safety Suite Device Configurator on Flash Drive.

Gas Sensor Type Photoionization Detector (PID)
Measuring Range VOCs 0 - 1000 PPM
Measuring Range H2S 0.1 - 100 PPM
Measuring Range LEL 0 - 100% LEL
Measuring Range CO 0 - 500 PPM
Measuring Range O2 0 - 30%
Internal Memory 6 months for 5 sensors at 1-minute intervals
Power Alkaline Batteries , Rechargeable Lithium Ion Battery
Shipping Dimensions (LxWxD) 18x14x9
Weight (lbs) 11.000000

Write Your Own Review
You're reviewing:MultiRAE Lite PID by RAE Systems - Multigas Monitor
Your Rating