RAE Systems ToxiRAE Pro CO2 Personal Single Gas Detector

G02-0007-000
$35.00
RAE Systems' ToxiRAE Pro wireless, personal single-gas monitors reliably and accurately monitor common toxic industrial chemicals (TICs), volatile organic compounds (VOCs), combustible gases, carbon monoxide (CO), carbon dioxide (CO2), and oxygen (O2). It provides five-way local and remote alarms if a threat is detected or a man is down. The ToxiRAE Pro CO2 uses a nondispersive IR sensor to detect 0 to 5,000 ppm with 100ppm resolution.
  • Comes with an NDIR sensor for CO2: 200 to 50,000 PPM range (0-5% volume)
  • Display readout shows STEL, TWA, peak and minimum values plus real-time gas concentration readings and alarm status
  • Visual, audible, and vibratory alarms plus Man Down Alarm; five-way local notification of alarm conditions
  • Datalogging up to three months
  • IP65/67 water- and dust-resistant case and rubber protective boot; Hazardous area classified for use in Class I, Div 1, Groups A-D environments
  • Battery runtime eight hours minimum
  • Fully automated bump testing and calibration with AutoRAE 2
More Information
SKU G02-0007-000
Manufacturer RAE Systems
Kit Contents

Monitor NDIR sensor for CO2, alligator clip, protective rubber boot, rechargeable battery, charging and PC communications cradle, PC communications cable, AC adapter, calibration adapter, quick start guide, documentation CD, ProRAE Studio II software, calibration card, and carrying case.

Gas Sensor Type Infrared Cell (IR)
Measuring Range CO2 0 - 50000 PPM
Internal Memory 3 Months at 1-Minute Intervals
Power Rechargeable Battery
Shipping Dimensions (LxWxD) 11x8x5
Weight (lbs) 4.0000

Write Your Own Review
You're reviewing:RAE Systems ToxiRAE Pro CO2 Personal Single Gas Detector
Your Rating