ToxiRAE Pro NO by RAE Systems - Personal Nitric Oxide (NO) Detector
G02-B410-100
As low as
$95.00
RAE Systems' ToxiRAE Pro personal Nitric Oxide (NO) detector: 0 - 250 ppm range, 0.5 ppm resolution.
It provides five-way local and remote alarms if a threat is detected or a man is down.
- Comes with Nitric Oxide (NO) sensor, range 0 to 250 PPM with Resolution of .5 PPM
- Display readout shows STEL, TWA, peak and minimum values plus real-time gas concentration readings and alarm status
- Visual, audible, and vibratory alarms plus Man Down Alarm; five-way local and remote wireless notification of alarm conditions
- Datalogging up to three months
- IP65/67 water- and dust-resistant case and rubber protective boot; Hazardous area classified for use in Class I, Div 1, Groups A-D environments
- Battery runtime eight hours minimum
- Fully automated bump testing and calibration with AutoRAE 2
| SKU | G02-B410-100 |
|---|---|
| Manufacturer | Honeywell RAE Systems |
| Kit Contents | Monitor with Nitric Oxide (NO) sensor, alligator clip, protective rubber boot, rechargeable battery, charging and PC communications cradle, PC communications cable, AC adapter, calibration adapter, quick start guide, documentation CD, ProRAE Studio II software, calibration card, and carrying case. |
| Gas Sensor Type | Electrochemical Cell (EC) |
| Internal Memory | 3 Months at 1-Minute Intervals |
| Power | Rechargeable Battery |
| Shipping Dimensions (LxWxD) | 13x10x5 |
| Weight (lbs) | 5.000000 |
Write Your Own Review