Testo 350 Engine Kit with Hydrocarbon Sensor for Combustion System Compliance Testing and Troubleshooting
Rent the Testo 350 portable combustion analyzer with hydrocarbon sensor for EPA-compliant emissions testing, industrial stack testing, and comprehensive combustion diagnostics. This advanced flue gas analyzer measures up to six gases simultaneously, O₂ (0-25% volume), CO (0-10,000 ppm), NO (0-4,000 ppm), NO₂ (0-5,000 ppm), SO₂ (0-5,000 ppm), and CₓHᵧ (hydrocarbons), with EPA-certified accuracy for regulatory compliance testing. Ideal for environmental consultants, emissions testing firms, and industrial facilities performing stack testing and regulatory monitoring on engines, boilers, turbines, and industrial combustion systems.
The Testo 350 Engine Kit is specifically configured for stationary engine testing with the hydrocarbon (HC) sensor for measuring unburned fuel emissions. This configuration provides complete combustion analysis for natural gas engines, diesel engines, gas turbines, and other industrial combustion equipment requiring EPA compliance documentation. Remote operation via wired or Bluetooth control enables safe testing in hazardous or difficult-to-access locations.
Rental includes: Testo 350 analyzer with up to 6 gas sensors (including hydrocarbon sensor), flue gas sampling probe with thermocouple, integrated printer with paper, rechargeable battery, AC charger, protective carrying case, instruction manual (flash drive).
******* Scroll down to see related products to add to your order if needed, such as low range sensors and sintered filter probe ******
| Gas Sensor | Range | Resolution | Accuracy | Response Time |
|---|---|---|---|---|
| O₂ | 0–25% vol | 0.01% | ±0.2% | <20 seconds |
| CO | 0–10,000 ppm | 1 ppm | ±10 ppm or ±10% | <40 seconds |
| CO (Low Range)* | 0–500 ppm | 0.1 ppm | ±5 ppm or ±5% | <40 seconds |
| NO | 0–4,000 ppm | 1 ppm | ±5 ppm or ±5% | <30 seconds |
| NO (Low Range)* | 0–300 ppm | 0.1 ppm | ±2 ppm or ±5% | <30 seconds |
| NO₂ | 0–5,000 ppm | 0.1 ppm | ±5 ppm or ±5% | <40 seconds |
| SO₂ | 0–5,000 ppm | 1 ppm | ±5 ppm or ±10% | <40 seconds |
| CₓHᵧ (HC) | 0–40,000 ppm (as CH₄) | 10 ppm | ±100 ppm or ±5% | <60 seconds |
Additional measurements:
-
- Flue gas temperature: -40 to +1,200°C
- Ambient temperature: -20 to +50°C
- Draft pressure: -200 to +200 hPa
- Differential pressure: -200 to +300 hPa
- Flow velocity: Calculated from differential pressure
Calculated parameters:
- Combustion efficiency (η)
- Excess air (λ)
- CO₂ concentration (calculated)
- Flue gas loss (qA)
- Dew point temperature
- NOₓ (total nitrogen oxides = NO + NO₂)
Memory and data logging:
- Storage capacity: 100 test locations with 10 measurement tests per location (1,000 total measurements)
- Data logging intervals: Configurable from 1 second to 60 seconds per measurement
- Storage modes: Manual trigger or continuous automatic logging
- Data fields stored: All measured gases, temperatures, calculated values, date/time stamp, location ID, operator notes
Power and battery performance:
- Battery type: High-capacity rechargeable lithium-ion battery pack
- Runtime at +20°C: 8 hours continuous operation with all sensors active
- Runtime variables: Battery life reduced at cold temperatures, with heavy printer usage, or with Bluetooth active
- Charging time: 4 hours for full charge from empty
- Hot-swap capability: Replace battery without losing stored data
- Low battery warning: On-screen indicator with 30-minute advance warning
- AC operation: 100-240V, 50/60 Hz universal adapter allows unlimited runtime when connected to mains power
Environmental:
- Operating temperature: -5 to +45°C (analyzer), -40 to +1,200°C (probe)
- Storage temperature: -20 to +50°C
- Humidity: 5 to 95% RH, non-condensing
- Protection class: IP40 (analyzer), probe designed for harsh flue gas environments
| SKU | 400563 3513-0554 2300 |
|---|---|
| Manufacturer | Testo |
| Kit Contents | Gas sensors for CO, O2, NO, NO2, SO2, and CxHy, control unit, particulate filters, printer paper, carrying strap, 12-inch engine probe with 7-foot hose and 12-inch thermocouple probe with 7-foot or 16-foot cable, heat shield, RS-232 cable, Testo easyEmission software, 16-foot remote control cable, transport case, certificate of calibration, and user manual. |
| Gas Sensor Type | Electrochemical Cell (EC) |
| Measuring Range Draft and Flow | -16" - 16" WC |
| Measuring Range CO | 0 - 10000 PPM |
| Measuring Range CXHY | 100 - 40000 PPM |
| Measuring Range Methane | 100 - 40000 PPM |
| Measuring Range Propane | 100 - 21000 PPM |
| Measuring Range O2 | 0 - 25% |
| Measuring Range NO2 | 0 - 5000 PPM |
| Measuring Range NO | 0 - 4000 PPM |
| Measuring Range Butane | 100 - 18000 PPM |
| Internal Memory | Up to 250000 Values |
| Power | AC Line Power |
| Shipping Dimensions (LxWxD) | 24x20x10 |
| Weight (lbs) | 35.000000 |
