TSI's PortaCount® Pro 8030 is a quantitative respirator fit test system for testing disposable filtering facepieces Series 100, 99, P3, and HEPA masks, half and full-face masks, gas masks, PAPR, and SCBA masks. Use this if you've used a TSI PortaCount Plus 8020 to conduct past tests.
The PortaCount Pro 8030 is now ready to use the new OSHA-approved fast fit test protocol that reduces your test time by 65%. Please note that while the protocol is approved at the federal level, your state may not have yet accepted it. Please check with your state OSHA to make sure the test complies with local requirements.
Kits include: 8030 base unit, AC adapter, alcohol cartridge and fill capsule, storage cap, two zero check filters, 8016 alcohol supply kit, 3/16" and 1/4" hose adapters, two spare alcohol wicks, carrying case, FitPro software CD, 1GB flash memory drive, USB cable, and user manual. If the mask adapter kit you need is not listed below, please order separately.
*TSI Fit Test Adapter Spreadsheet
SPECIFICATIONS
Fit Factor Range
1 to greater than 10,000
Typical Fit Factor
Accuracy ±10% of reading
Respirator Facepieces that can be Fit Tested
Full-face elastomeric, Half-face elastomeric, NIOSH series-100 filtering-facepiece, NIOSH series-99 filtering-facepiece & NIOSH series-95 filtering-facepiece*
Fit Factor Measurement
Direct measurement of fit factor (Cout/Cin)**
Dimensions
(HWD) 6.75 in. x 8.5 in. x 9.5 in. (17 cm x 22 cm x 24 cm)
Weight
Unit Only 5.0 lb. (2.7 kg) With Standard Accessories and Case 16 lb. (7.3 kg)
Power
Autosensing 100 to 250 VAC, 50 to 60 Hz
Flow Rate
Sample 350 cm3/min Total 1000 cm3/min (nominal)
Temperature Range
Operation 32 to 100°F (0 to 38°C) Storage -40 to 122°F (-40 to 50°C)
Alcohol
Hours Per Charge 6 hours at 70°F (21°C) Alcohol Type 99.5%+ reagent-grade isopropyl
Carrying Case Dimensions
(HWD) 9 in. x 13.7 in. x 19.5 in. (23 cm x 34.8 cm x 49.5 cm
Pass/Fail Setting
User-selectable: 0 to 10,000
Minimum PC Hardware Requirements for
FitPro+ Fit Test Software
Windows® 7 (32 and 64 bit), Windows 8 (32 and 64 bit),
or Windows 10 (32 and 64 bit) operating system
Microsoft.Net version 4 (installation software will install
Microsoft.Net if necessary) Note — An internet connection
is required to install Microsoft.Net
≥ 1 GHz process
≥ 1280 x 800 screen resolution monitor
500 MB free space on the hard drive
1 free USB port
CD-ROM reader or internet connection (to install the software
| SKU | 8030 |
|---|---|
| Manufacturer | TSI Alnor |
| Kit Contents | Included Items
|
| Shipping Dimensions (LxWxD) | 23x16x16 |
| Weight (lbs) | 23.000000 |
| Power | AC Line Power |
