Monitor CO, CO2, VOC's, Temp, RH Barometric Pressure, and particulates with our QTrak XP configuration! View graphs of data in real time during monitoring and choose the best unit of measurement for your application. Easily set up logging parameters and customize log names to keep your data organized!
- CO, CO2, VOC's in ppm, ppb, mg/m3 or ug/m3 (Resolution Dependent)
- Temp, RH, BP, Dew Point
- Mass Concentration of PM1.0, PM2.5, and PM10 in mg/m3 or ug/m3
- Particle Counts of .3, .5, 1, 2.5, 5, and 10 microns in #/cm3 , #/ft3 , or #/L3
Q-Trak XP™ Indoor Air Quality Monitor can perform a wide range of indoor air quality assessments and data logging. The powerful, compact multi-sensor module supports up to 6 selectable gas sensors while simultaneously measuring particle mass concentration, particle concentration, temperature, relative humidity. Standard IAQ calculations including wet bulb, dew point and percent of outdoor air mix are also supported.
A variety of user selectable gas sensor can be added, changed and calibrated as needed. Housed within the unique modular design, the plug-and-play sensors provide an exceptional level of expansion capacity for responding to the increasing demands of IAQ assessments, while keeping the cost of ownership low.
See Page 73 - 76 of manual for detailed specifications.
Temp: Range 32 - 140 degrees F with .1 degree resolution
RH: Range 0 - 100% with .1% resolution
Particulates: 0 - 500 ug/m3 with 1 ug or .001 mg resolution
Particle Counts on .3, .5, 1.0, 2.5, 5.0, and 10.0
CO2: Range 0 - 5,000 ppm with resolution of 1 ppm. Accuracy of 50 ppm
CO: Range 0 - 400 ppm with resolution of .1 ppm
VOC High: 0 - 2000 ppm, resolution of .1 ppm
|SKU||TSI 7585 Q-Trak XP IAQ Monitor|
- Q-Trak XP Monitor
- Carrying Case
- Micro-USB Cable
- Flash Drive with Software/Manuals
- Sensor Calibration Cap
|Shipping Dimensions (LxWxD)||21 x 16 x 10|
|Internal Memory||73 million data points|