SMP3 by WaveControl - EMF Meter with WP10M and WPF60 Probes
This kit includes 2 probes for standard and 5G high frequency measurements. The Wavecontrol SMP2 electromagnetic field meter offers broadband electromagnetic field metering plus industrial frequency spectrum analysis in a single portable unit. It uses Fast Fourier Transform (FFT) and Weighted Peak Method (WPM) for low frequency spectrum analysis. The SMP3's broadband field probes are interchangeable, and automatically recognized by the base unit for flexibility in measuring ranges and use across a broad range of EMF assessment and validation applications.
Kit Includes: Meter with WP410M (1Hz to 10MHz) and WPF60 (1 MHz to 60 GHz) PC software for control and reporting, PDF user manual, charging cord, calibration certificates, and a rugged carrying case.
The Wavecontrol SMP3 configured exclusively for the WP10M and WPF60 field probes providing precise EMF measurements across a wide range of industrial and occupational safety applications. This flexible setup enables both low-frequency WP10M (1 Hz–10 MHz) and high-frequency WPF60 (1 MHz–60 GHz) electric and magnetic field analysis in one streamlined system.
The SMP3 simultaneously displays field strength values for X, Y, Z axes and total field (RMS, Peak, Max, Min, Avg) across a wide range of units including V/m, A/m, µT, mT, W/m², and %. Built-in memory supports over 1 million data points, and its rechargeable lithium battery provides up to 24 hours of continuous operation. Configurable averaging (fixed or sliding), logging intervals, and real-time FFT display make it ideal for both compliance assessments and detailed EMF diagnostics.
Kit Includes: SMP3 meter, WP10M probe, WPF60 probe, AC charger, USB A-C cable, USB with manuals and software, calibration certificate. Optional Add-on: tripod and horizontal extension kit.
WP10M Probe Specifications
-
Frequency Range: 1 Hz – 10 MHz
-
Measurement Modes: Electric & Magnetic Field, Real-Time FFT, Spectrum Analysis
-
Electric Field Range: 2 mV/m – 100 kV/m
-
Magnetic Field Range: 1 nT – 47 mT
-
Resolution: Electric: < 0.4 mV/m, Magnetic: < 1 nT (at 50 Hz)
-
Sensor Type: Isotropic, True RMS
-
Applications: Power grid and transformer station EMF assessments, Railway worker exposure monitoring, Low-frequency industrial EMF evaluations
WPF60 Probe Specifications
-
Frequency Range: 1 MHz – 60 GHz
-
Field Type: Electric Field, Isotropic, True RMS
-
Measurement Range: RMS: 1 – 55 V/m, CW: 1 – 1000 V/m
-
Dynamic Range: 60 dB
-
Linearity: ±2 dB (1–2 V/m), ±1 dB (2–250 V/m)
-
Applications: RF safety audits for telecom (GSM, LTE, 5G, WiFi), Defense site radiation measurements, Industrial and R&D lab compliance testing.
Key Features
-
Time & Frequency Domain Measurement
Real-time FFT and time-domain analysis across a wide frequency range—ideal for diagnostics, troubleshooting, and regulatory compliance. -
Automatic Probe Recognition
SMP3 automatically detects and configures for the connected WP10M or WPF60 probe, loading the correct calibration data and settings. -
Weighted Peak Method (WPM)
Built-in real-time comparison against international exposure limits (ICNIRP, EU Directive, IEEE, etc.) using the Weighted Peak Method. -
Advanced Logging & Reporting
Stores over 1 million samples. Includes screenshot capture, USB-C data export, and optional GPS tagging. -
High-Frequency Precision + Low-Frequency Sensitivity
Supports spectrum analysis, broadband measurement, and time-domain logging across a full 1 Hz – 60 GHz range. -
Measurement Flexibility
-
High-pass filters: 1 Hz, 10 Hz, 25 Hz, 100 Hz
-
Adjustable measurement time: 1 second to 100 hours
-
Selectable frequency spans for FFT: from 400 Hz to 10 MHz
-
RMS and peak display with adjustable time-based graphing (1 sec to 12 min)
-
Measurement modes: time-domain, frequency domain, frequency log, spatial average
-
Programmable alarms, screen-shot capture, and auto-gain for peak detection
-
| SKU | SMP3-2-WP10M |
|---|---|
| Manufacturer | WaveControl |
| Kit Contents | This kit includes 2 probes for standard and high frequency measurements. The Wavecontrol SMP2 electromagnetic field meter offers broadband electromagnetic field metering plus industrial frequency spectrum analysis in a single portable unit. It uses Fast Fourier Transform (FFT) and Weighted Peak Method (WPM) for low frequency spectrum analysis. The SMP2's broadband field probes are interchangeable, and automatically recognized by the base unit for flexibility in measuring ranges and use across a broad range of EMF assessment and validation applications. Kit Includes: Meter with WP10M (1Hz to 10MHz) and WPF60 (1 MHz to 60 GHz) PC software for control and reporting, PDF user manual, charging cord, calibration certificates, and a rugged carrying case. |
| Shipping Dimensions (LxWxD) | 20x15x9 |
| Weight (lbs) | 15.000000 |
| Power | Rechargeable Li-ion Battery |
