******** This option X-550 comes equipped for LEAD PAINT ONLY
Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for PMI/NDT testing requirements.
The X-550 provides initial analysis in 1 second, with automatic updates for greater precision every 1 second thereafter. The X-550 is equipped with our latest Alloy App for general alloy analysis. Typical test times are 1-3 seconds. Also included is the Sulfidic Corrosion App with optimized calibration for low silicon in Carbon Steel, and Residuals App with optimized performance on Ni, Cr, Cu, Nb, and V for low residual material in HF alkylation units. Standard grade library includes approximately 500 entries. User may add additional grades at any time without limit. Analyzer auto-calibrates and checks calibration on external 316 stainless test material (included). Analyzer also features protective mesh covering SDD detector. This design virtually eliminates accidental detector punctures.
Analyzer includes integrated micro and macro camera for photo-documentation of tests and pinpointing specific test regions on welds or non-homogeneous sample
areas. Google-powered, Android operating system providing easy and intuitive operation. Wireless and Bluetooth built in for easy connectivity to other devices.
Included with each System: 2 Li-Ion batteries, battery charger, ruggedized carrying case, PCS 1.0 lead paint standard calibration check with the NIST SRM 2573, operations manual.
2.8 lbs. with battery
7.25″ x 10.5″ x 4.5″
On board rechargeable Li-ion battery, rechargeable inside device or with external charger, AC power, hot-swap capability (60s max swap time).
2.7-inch color capacitive touchscreen — 400 MHz Qualcomm Adreno 306 2D/3D graphics accelerator.
Password protected usage (user level) and internal settings (admin).
CE, RoHS, USFDA registered, Canada RED Act.
40 kV, 200 uA Rh anode and 10kV, 500 uA for alloy testing, 50 kV, 200 uA Au anode for most other apps.
20 mm2 silicon drift detector (active area), 140 eV resolution FWHM at 5.95 Mn K-alpha line.
4 position filter wheel for beam optimization.
1.2GHz quad ARM Cortex A53 64/32-bit, RAM: 2GB LP-DDR3, Storage: 16 GB eMMC (storage).
12 bit with digitization rate of 80 MSPS 8K channel MCA USB 2.0 for high-speed data transfer to host processor. Digital filtering implemented in FPGA for high throughput pulse processing 20 nS – 24 uS peaking time.
10°F to 130°F at 25% duty cycle.
Fundamental parameters. For Geochem and Environmental Soil apps, users may also choose “Compton Normalization” method and/or use empirically derived calibrations.
External 316 stainless check standard for calibration verification and energy scale validation.
32 elements standard, specific elements vary by app. Additional elements may be added upon user request.
Alloy, Geochem (Mining), Empirical, Environmental apps. New apps are added regularly.
Standard library contains 500+ grades, no practical size limit. Multiple libraries supported, grades may be added on analyzer or via PC software package (ProfileBuilder).
Alloy App offers full alloy chemistry and grade ID, with the following pre-calibrated elements for all alloy bases: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Se, Zr, Nb, Mo, Ru, Pd, Ag, Au, Pb, Bi, Sn, Sb, W, Ta, Hf, Re
Residuals App offers full alloy chemistry and grade ID, with an optimized calibration and test configuration for Ni, Cr, Cu, Nb and V in Carbon Steel. Also
automatically calculates Cr + Ni + Cu and Nb + V for verifying low RE material.
This analyzer will NOT detect rare earth elements. The X555 is the only analyzer that will detect REE’s as it has a 55kV tube.
|SKU||SciAps X-550 XRF Analyzer for Lead Paint Only|